100% Helium Gas Compressor 0.5m3/min 205Bar 400V 50Hz High Pressure Hot sales

 

Introduction to products

PGH21 0.5 EC is designed for continuous operation and design of high quality high pressure helium pressurization machine. Its reliable performance, simple operation, easy maintenance, is widely used in industry, air tightness test, valve, pipeline testing, gas recovery ,etc. Its eliable product quality and stable operation performance, full automatic control system, simple operation, easy maintenance, is the ideal choice of industrial users.

l  Air cooling engine, designed for high pressure helium gas and complex demanding applications such as environment design

l  4 level compression, reduce the load per level;Single action, deep fin cylinder, increase the unit operation reliability

l  Carefully chosen intake valve and exhaust valve and relief valve is suitable for various cases of operating conditions

l  Overloading import filters with silencer, can clean the gas into the system.In order to adapt to the operating conditions of special circumstances and carefully chosen

l  Unit perfect balance, no special installation base, at the same time improve the life of the parts

l  Plunger piston design, compressed by the piston guide piston push, work more stable

l  Roller bearing to use on the crankcase, needle roller bearing and sliding bearing used in connecting rod and crankshaft

l  Shields and pressure on the crankcase for users to choose

l  Efficient cooling system, the engine exhaust temperature of about 15 ℃.Air/water cooler flexible configuration according to the application requirement

l  Each level compression between drainage device equipped with cooler and condensation

l  Oil pump drive forced lubrication system, provide perfect lubrication and cooling to each of the moving parts

l  Lubricating oil system pressure is strictly monitored, ensure the lubrication unit, precision filtration, oil filter for oil to ensure the safety of units 

 

Scope of supply

 

l  FIVE-CYLINDER COMPRESSOR, AIR COOLED, SINGLE EFFECT, FIVE-STAGE COMPRESSION.

 

l  INTAKE REMOVABLE FILTER, WITH SILENCER.

 

l  NORMAL INERTIA FLYWHEEL, FOR V BELTS TRANSMISSION.

 

l  V BELT AND BELT ENCLOSURE

 

l  COOLING FAN

 

l  PRESSURE OIL LUBRICATION SYSTEM

 

AUTOMATIC VALVES, BIG FLOW AREA, OPERATING MUCH BELOW THEIR NOMINAL CHARACTERISTICS.

 

 

l  AIR-COOLED STAINLESS STEEL AFTERCOOLER, FURNISHED WITH SAFETY VALVE.

 

l  AT ALL LEVELS OF PRESSURE GAUGE AND OIL PRESSURE GUAGE

 

l  AUTO CONDENSATION DRAIN ON SEPERATORS SYSTEM

 

l  11KW, 400V/3/50 IP54 MOTOR

 

l  FILLED WITH SYNTHETIC OIL

 

l  OPERATION MANUAL AND PART LIST

 

l  ONE YEAR GUARANTEE

 

Unit is equipped with automatic control system configuration is as follows:

PGH21-0.5EC  CABINET MODEL AUTO CONTROL PANEL:

l  LOW OIL LEVEL SWITC

l  START BUTTON

l  STOP BUTTON                

l  EMERGENCY STOP

l  PLC TEXT DISPLAY

l  STAR-DELTA STARTER

l  FAULT INDICATOR

l  HIGH PRESSURE SENSOR FOR AUTO STOP START 

Technical proposal

PGH21-0.5EC
Compressed stages	4
Number of cylinders	4
Inlet pressure	0.05	Mpa
Working pressure	20.5	Mpa
Capacity	0.5	Nm3/min
Exhaust temperature rise	15	°C
Oil capacity	4.5	L
Lubricating type	Splash and pressure lubrication
Oil content	<0.3	mg/m3
Motor power	11	kW
Voltage	380--400	V
Frequency	50	Hz
Speed	1300	rpm
Level of protection	IP 54
Insulation grade	F
Environment temperature	-5~+45	°C
Noise	85	dB(A)
Cooling type	Air
Cooling gas flow	10000	m³/h
Transmission Model	Belt
Maximum permissible tilt Angle	15°
Highest elevation	2000	m
Dimension	790*1020*1500	mm
Weight	495	Kg
Installation type	No