25.0 Mpa 1 m3/min High Pressure Series VF-1/250 Air Compressor Hot Sales

 

Product name: VF-1/250 High pressure compressor (motor) 

The nominal volume flow m after/min: after 1.0 m3/min 

Breathe in Mpa pressure: the atmospheric pressure 

Exhaust Mpa pressure: 25.0 Mpa 

Equipped with power Kw: 22 Kw 

Oad mm: 1850*1200*1300 (mm) 

Kg weight: 1200 Kg 

 

Product features: 

    1, crankcase parts:Crankcase on both sides of the side cover for disassembly and check and inspect oil window, in both dynamic LianJieDuan with bearing and the bearing cover before, after the upper bearing cover of the fan bracket to support the fan parts: the upper casting plane with two cylinder support, a total of four cylinder, and is equipped with breathing apparatus.At the bottom of the crankcase is equipped with the oil pan, oil pan has a dedicated compressor oil inside.

    2, crankshaft, connecting rod and componentsCrankshaft crank connecting rod installation, both ends of the crankshaft rolling bearing, crankshaft main loading flywheel is combined with elastic coupling: with small end near the bearing pulley to drive the cooling fan.Lubrication of the crankshaft is preview by the connecting rod rod splash lubrication to the crankshaft and piston pin parts.

   3, the piston parts:Primary, secondary, tertiary, quaternary. The piston parts, one, three for cast aluminum alloy, 2, 4 for casting, steel.A, level 2 which is equipped with piston rings, piston upside for flat ring, middle ring be twisted, the lower part of oil ring, oil scraper ring opening and piston pin hole stagger over 60 degrees, 120 degrees of the piston ring stagger installation.

    4, cylinder parts:Level 1, level 2, level 3 and level 4 cylinder parts, level 1, level 2, level 3 and level 4 cylinder, cylinder head appearance are cast with cooling become warped, to increase the cooling area, into the exhaust valve components parts inside the cylinder head, into the exhaust pressure cylinder, exhaust gland.

    5, into the exhaust valve components:Level of intake valve, exhaust valve, are annular valve structure, there are seat spring to support the annular valve, valve plates and the spring adopt high quality steel and three or four for the combination of inlet and exhaust valves.

    6, cooler and fan parts:One, two, three, four cooler and cooling fan of two parts.Pick up in the compressor level 1, level 2, level 3 and level 4 into vent.By her footing installed on the base, the upper cooler is equipped with safety valve, the bottom with a drain valve, toward the crankcase end is equipped with guide cover and protective cover, middle is equipped with a type of wind cooling fan, a fan bracket will fan components are installed on the crankcase, crankshaft pulley by the end of the crankcase through v-belt drive fan rotation.

The scope of supply

     1, the scope of supply of equipment:Compressor, motor, cooler parts, parts, instrument panel parts of tracheal road, drainage pipe parts, instrument piping components, coupling parts, random spare parts, special tools, chassis parts, safety valve, check valve at all levels.

     2, random data:Use manual, certificate, packing list, instructions, and circuit diagram.

After-sales service commitment:

    1, in a timely manner to the scene out of the box counting.

    2, to send free on-site technical guidance, commissioning.

    3, free training technology, operating personnel.

    4, a 3 x 24 hours service mechanism, namely consulting reply 24 hours a day, 24 hours technical support hotline, 24 hours door-to-door service (500 km).

    5, accept the supervision and spot check.