Atlas Copco Hydraulic Drilling Rig Roc L6 L8 For Sale

Chinese Suppliers Atlas Copco Hydraulic Drilling Rig Roc L6  For Sale With Good Price

Master of quarry blast hole drilling

Hole diameter 92mm-152mm

 

Power and productivity

ROC L625& ROC L630are high-capacity down-the-hole crawler drills primarily designed for quarry blast hole drilling in virtually all types of rock formations for aggregate production and limestone for cement production. Fitted with Atlas Copco’s high pressure compressors, 25 and 30 bar, and powerful CAT C11 and C13 diesel engines the ROC L6 series is also appreciated in mining operations and coal over- burden drilling thanks to its flexibility and overall drilling capacity and economy.

Flexibility, precision and mobility

The ability to drill in different angles and to accurately set the hole inclination and control the depth of the hole contributes to the overall economy of the operation. The boom and feed movements of ROC L6 offers excellent flexibility for vertical, horizontal and angle drilling. A well balanced design and limited transport dimensions makes the rig movement smooth and transport from site to site easy.

The ROC L6 gives you:

Efficient utilisation of hammer capacity through a unique cylinder feed system Productivity beyond conventional rigs using down-the-hole hammers Transport configuration ideal for single or multi site operations Straight accurate blast holes for controlled fragmentatoin Deep hole drilling capacity Flexible drilling angles

 

Long life aluminium box profile hydraulic cylinder feed system with exchangeable snap on stainless steel wear protections

 

Carousel tube handling system with deep hole capacity

 

A selection of rotary heads for optimum use of 3–5" down-the-hole hammers

 

Full view ROPS and FOPS cabin, silenced and vibration damped

 

Full-length, spring operated canopy doors offers full access to service points

 

Flexibility and mobility in focus

The ROC L6 has excellent tramming ability for quick, safe transportation on site and between work sites. The ROC L6 features a strong single section boom design that permits the operator to position the feed for transport or drilling, precise and fast, from within the cab.

 

DTH hammers – strikingly efficient

The ROC L6 series can be equipped with a range of Atlas Copco down-the-hole (DTH) hammers well known for their high performance in terms of speed, reliability and longevity. With higher penetration rates and lower fuel consumption per meter drilled Atlas Copco's hammers make a positive impact on your bottom line.

 

Designed to keep you up and running

Like all our crawlers, the ROC L6 is designed for easy maintenance with ready access to service points. All hoses and cables are marked at each end to coincide with the schematic drawings in spare parts lists for easy trouble-shooting.

 

Drilling made perfect

The electronic hole inclination and depth control instrument combined with a laser receiver (optional) ensure that all blast holes are perfectly aligned and drilled to a predetermined level irrespective of the ground conditions. With the optional GPS compass all holes are guaranteed in parallel towards the blasting direction. Mentioned features ensure even bench bottoms, controlled fragmentation, easier loading and haulage and savings in the total excavation cost.

 

The optimum rig for multi site operations

 

Focus on the rig

The ROC CARE package is designed for contractors and quarries at their surface drilling operations.The package includes scheduled maintenance,rig inspections,extended warranty for all major rig components and procom.

 

Lifting aid

The feed mounted service which offers lifting capacity when loading drill tubes into the rod handling system for extend hole depth,or for lifting of components at service.the control is conveniently located at the break out table.

 

Fast and accurate

The GPS Compass aiming device uses the GPS satellite system and enables you to lock the blast direction for every hole in the blast.GPS compass adds a new dimension to the extensive automation already available on ROCl6

 

Increased safety

With the back camera the rear terrain can be viewed on a cab mounted monitor for increased safety at rear tramming.the same monitor may also be connected to the optional DVD for viewing DVD discs.

Technical specification

Recommended hole range ROC L625
COP 34, COP 44	95-130 mm	3 5/8''-5 1/8''
COP 34, COP 44, COP 54, COP 54GE	110-152 mm	4 1/3''-5 1/8''
Hole depth	45 m	148'
Working pressure, max.	25 bar	363 psi
FAD	295 l/s	625 cfm
Working pressure, max.	30 bar	435 psi
FAD	354 l/s	729 cfm
Rating at 1,800 rpm	287 kW	440 hp
Rating at 1,800 rpm	328 kW	440 hp
Capacity	760 l	201 US gal.
Feed length, total	11,560 mm	38'
Travel length	5,400 mm	17'7''
Feed extention	1,900 mm	6'3''
Feed rate max.	0.9 m/s	177 ft/min
Feed force, max.	40 kN	8,992 lbf
Tramming speed, max.	3.5 km/h	2.2 mph
Traction force	166 kN	37,310 lbf
Track oscillation	+10º
Ground clearance	405 mm	16''
Weight, excl. options	21,700 kg	47,900 lb
Length	10,700 mm	35'1''
Height	3,200 mm	10'6''

hydraulic drilling rig

atlas copco down-the-hole top hammer hydraulic drill

copco hydraulic drill rigs

down the hole (dth)

china hydraulic rock drill

hydraulic water well drilling rig

hydraulic rotary drilling rig

water drilling rig

water well drilling rig for sale

truck mounted water well drilling rig

down the hole hammer drill rig

geotechnical investigation drill rig

portable drilling rig

drilling rig machine

tractor mounted drilling rig

mobile drilling rig

core drilling rig

truck mounted drilling rig for sale