ZGYX-520/510 hydraulic drill rig(TOPHAMMER)
ZGYX-520/510 hydraulic drill rig(TOPHAMMER)
Description
Integrated Top Hammer Surface Drill Rigs
ZGYX-510/520
Product Introduction
High efficiency & energy saving:
penetration rate is about 1 m/min, average fuel consumption rate below 0.5 L/m, operated in the recommended hole range.
Cross terrain ability & flexibility:
Folding boom design reduces transportation dimensions and guarantees stability with wider drilling coverage to allow the tramming speed up to 4km/hr.
Enhanced oscillation design improves rig ability in rough terrain and make it possible to operate on a 25 degree slope.
Cost & maintenance:
Other than key components, most parts including hydraulic drifter localized to lower cost of purchase and maintenance comparing with imported rigs.
Advanced design concept -----Best Price to Value comparison
ZEGA own developed component:
ZY-101/103 Hydraulic drifter
Slender but strong piston for better energy transmission. 3 adjustable modes of long, medium and short strokes according to rotation, rock conditions
and hole size for best work efficiency.
Technical Specification:
Model |
ZGYX-510 |
ZGYX-520 |
Rock Drill |
|
|
Model |
ZY-101 |
ZY-103 |
Manufacturer |
ZEGA |
ZEGA |
Hole Range. |
42-76 mm |
42-76 mm |
Rotation Speed |
0-300 r/min |
0-300 r/min |
Max. Rotation Torque |
800 N.m |
800 N.m |
Max. Percussion Frequency |
40 HZ |
40~60 HZ |
Drill Rod |
T38x 3.66 m |
T38x 3.66 m |
Hole Depth |
15 m |
15 m |
Max. Impact Power |
14 kw |
15 kw |
Diesel Engine |
|
|
Manufacturer |
Cummins |
Cummins |
Model |
4BTA3.9-C125 |
4BTA3.9-C125 |
Rated Power |
93 kw |
93 kw |
Speed |
2100 rpm |
2100 rpm |
Fuel Tank Capacity |
210 L |
210 L |
Boom & Feed |
|
|
Boom Angle |
- |
-72° ~+54° |
Arm Angle |
- |
Left22°;Right37° |
Pitch Angle |
96° |
-8° ~+88° |
Swing Angle |
±10° |
Left15°;Right 97° |
Drifter Travel Length |
4180 mm |
4180 mm |
Feed and Lift Capacity |
14.4 kn |
14.4 kn |
Extension Length |
850 mm |
1200 mm |
Length of Feed Beam |
7236 mm |
7236 mm |
Rod Length |
3660 mm |
3660 mm |
RHS and numbers of『drills holding |
Option •4+1 |
Standard •4+1 |
Screw Air Compressor |
|
|
Manufacturer |
ZEGA |
ZEGA |
Air End Manufacturer |
GHH |
GHH |
Capacity F.A. D |
4.5 m3/min |
4.5 m3/min |
Max. Working Pressure |
7 bar |
7 bar |
Chassis |
|
|
Max. Climbility |
25° |
25° |
Ground Clearance |
360 mm |
360 mm |
Track Oscillation |
±14° |
±14° |
Max. Tramming Speed |
4 km/h |
4 km/h |
Max. Traction Force |
55 kn |
65 kn |
Specifications
Condition | New |